The Kangook KX-1
Starting at $1,999.
The Kangook KX-1 trike is the most modular trike available from Kangook Paramotors and is available in three configurations: the KX-1 Standard, KX-1 Komfort Solo, and the KX-1 Komfort Tandem. As compared to the Basik trike, the KX-1 is designed to carry higher loads. The KX-1 is a little bit longer, features fully welded diagonal braces, and features a fully welded frame (as opposed to bolted front potion on the Basik)
​
The KX-1 Standard:
The KX-1 Standard is a great choice for those looking to both foot launch and wheel launch. The KX-1 Standard trike is an independent chassis allowing the quick attachment of any Kangook foot launch paramotor. Four bolts are used to tightly secure the foot launch paramotor to the KX-1 frame. The paramotor harness and swing arms are used in this configuration allowing the paramotor to be quickly removed and foot launched. The KX-1 Standard can be converted to the KX-1 Komfort Solo or Komfort Tandem at any time.
​
The KX-1 Komfort Solo:
The KX-1 Komfort Solo is a great choice for those who only intend to wheel launch. The Basik Komfort is a dedicated trike which incorporates stainless steel roll bars for additional safety and stability. While this configuration does not use the foot launch paramotor swing arms and harness, any Kangook paramotor frame with engine can be attached to the Basik Komfort. A trike specific harness, which attaches to the roll cage, is used in place of a foot launch paramotor and the wing attaches to the roll cage as well.
​
The KX-1 Komfort Tandem:
The KX-1 Komfort Tandem is essentially a Komfort Solo with a stretched roll cage. A passenger harness is installed within the lengthened roll cage. The Komfort Tandem can be flown solo and in compliance with FAR 103 by simply removing the passenger seat and mounting provisions.
We highly recommend paring any of the KX-1 trikes with the Kangook Classic paramotor frame with the heavy duty option. This provides the maximum strength and significantly enhances protection for the propeller.
​
Assembly and disassembly of the KX-1 is a breeze! Both fiberglass axels are quickly removed using the quick release pin retainers.
​
Numerous wheel and ski options are available for all KX-1 configurations. These include:
​
-Brakes
-Ballon Tires
-Directly attached skis
-Stirrup skis
-Foot throttle
​
The Kangook KX-1 trike is finished with a durable powder coat finish. The frame is finished in black while the fiberglass axles retain a white color.
​
Like all Kangook Paramotors and trikes, the KX-1 is constructed entirely from 6061 T6 aviation grade aluminum. Fully welded frames are strong and have very few if any nuts, bolts, rivets or any other type of fastener. Fewer fasteners mean less worry of parts shaking loose from the vibration of a single cylinder engine and departing your frame and flying through your propeller.
​
Engine: 1 year
Frames: 3 years
Cages: 3 years
Harness: 3 years
​
The weight of the KX-1 Standard is only 38.2 lbs
The weight of the KX-1 Komfort Solo is 57.8 lbs
The weight of the KX-1 Komfort Tandem is 71.6 lbs
KX-1 Features
Reinforced Frame
Starting with the Basik frame, the KX-1 is length and strengthen with a welded front bracket. The KX-1 also adds two diagonal stiffeners that run from the front of the trike to where the axles tie in. This triangulation adds incredible strength!
Trike Launch or Foot Launch
4 Bolts are all that separate foot launching from trike launching! The quick 2 minute operation allows any Kangook Paramotor to be mounted to the KX-1 trike.
Add a Second Seat
With the KX-1 Komfort Tandem option you can fly solo or add a front seat! please be advised flying with a passenger requires a waiver/exemption of part of FAR 103 from the FAA.
Compatibility and Options
Paramotor Frame Compatibility:
Classic with the HD option is recommended
Amaruk
Phoenix K2
Vikking
​
Wheels:
Large Wheels (Standard)
Large Wheels with drum brakes
Balloon Wheels
​
​
Configurations:
KX-1 Standard
KX-1 Komfort Solo
KX-1 Komfort Tandem
​
Skis
Direct Attach Skis (these are used in place of wheels)
Stirrup Skis (these mount to your existing wheels)
​
​
Specifications
Weights:
X.X lbs: KX-1 Standard, trike frame only
XX.X lbs : KX-1 Komfort Solo, trike frame only
XX.X lbs : KX-1 Komfort Tandem, trike frame only
​
6061-T6 Aircraft Grade Aluminum
316 Stainless Steel
All Fasteners are A2 Stainless Steel
​
Fuel Tank: 10 Liter or 16.5 Liter
​
Geometry:
​XX Frame Length
XX Width with axels installed
XX Width with axles removed
​